Wuhan Linxuan Laser Co., Ltd
Add to Cart
Automatic Adjust Focus Sheet Metal Fiber Laser Metal Cutter Machine is suitable for contact-free cutting, hollowing or drilling of metal sheets in 0.5mm to 10mm, e.g., stainless steel, carbon steel, galvanized sheet, thin aluminum and thin copper etc. Fast and energy-efficient. Total system is high-return with low-investment
1. Cost saving on power consumption/ only 20-30% of co2 laser cutting machine under same power.
2. Flexibility and precision cutting of simple or complex parts .
3. Adopts imported world brand fiber laser/Life time over 100,000hrs .
4. Imported servo motor and gearing system ensure precision cutting .
5. High quality cut with no extra finishing required .
6. Higher cutting speed and efficient, speed of cutting plate over 10 meters per minute .
7. Non contact cut which means no marks or contamination of the material .
8. It's able to cut virtually any sheet metal.
Stainless steel, carbon steel, alloy steel, silicon steel, spring steel, aluminum, aluminum alloy, galvanized sheet and other metal pipes and tubes.
It is widely applied in industrial pipeline processing, explosion-proof equipment, military industry, chemical industry, oil exploration, lamps and lanterns, metal processing, ironware, building, etc.
| Working Area | 1500*3000mm |
| Laser Power | 700W Racus fiber power source |
| Laser Wave Length | 1064nm |
| Working Table | Saw tooth |
| Maximum Idle Running Speed | 1400mm/s |
| Position Accuracy | ±0.03mm/m |
| Moving Speed | 80m/min |
| Minimum Line Width | ± 0.02mm |
| Control System | Cypcut |
| Position Type | red dot |
| Power Consumption | ≤12KW |
| Working Voltage | 380V/50Hz, three phase |
| Auxiliary Gas | oxygen,nitrogen,air |
| Working life of fiber module | More than 100000 hours |
| Fiber laser cutting head | Lasermech made in USA |
| Focus lens | Lasermech made in USA |
| Driver system | 1500W servo motor made in Japan |
| Liner guider system | PMI H series linear guide made in Taiwan , |
| Transmit system | Dual Rack & Pinion type |
| Rack system | Herion made in Germany |
| Chain system | Igus made in Germany |
| Warranty time | Whole machine for 3 years (fiber module 2 years ) |
| Gross weight | 1500kg |
1. Standard plywood case, its compressive strength and bearing quality is better.
2. the board area is bit, the soil structure is good, it is better in leakproofness and waterproof.
3. when importing, the plywood case is with fumigation-free, the procedure is simple.
4. Delivery Detail: within 20-25 days after received your payment.